Photo Gallery

Check out this showcase of some of our spray foam, machine finish siding, and FrameGuard projects.

Click each image for full size

DelKote pre-stained shake siding--corner view
DelKote pre-stained shake siding, gable wall
Delkote R-14.8 closed cell spray foam under slab insulation
An impressive R42 open cell spray foam insulation inside a large scale school project in Asheville
closed cell foam installed on a crawlspace wall as part of a sealed and insulated crawlspace
close cell foam is a good options for metal buildings, offering great adhesion and a high R-value per inch
Delkote R30 open cell spray foam in a roof deck as intumescent paint is being applied
Passive solar home in fairview uses FrameGuard Total mold, moisture, and termite protection on structural lumber and machine-finished siding and trim
two types of pre-stained siding by DelKote
closeup look at two types of pre-stained siding by DelKote
closeup look at two types of pre-stained siding by DelKote
FrameGuard mold, termite and moisture resistant treatment applied to structural components including plywood sheathing, machine finish siding on several wall panels
high performance home project in gulf coast with machine-finished siding and trim, FrameGuard Total treated structural wood
open cell spray foam being installed in the roof deck of a bonus room over garage
finished open cell spray foam in an attic
spray foam is a good solution for vaulted ceilings, allowing a higher R-value in a limited rafter space.
open cell spray foam being installed in an unvented attic.
open cell spray foam in an attic and wall.  Spray foam expand to fill the space in which it is applied, resulting in a very even, through insulation if properly installed.
pre-stained siding by Delkote on a West Asheville bungalow
closed cell spray foam is a great choice for underslab insulation, offering high R-value (R7.4 per inch) and adequate compression strength for sub-slab applications.